The power you can get out of one of our systems, is defined by the specifications on the model you acquire. So, a SL3000-PP will provide you with 3,072 watts of stored energy; a SL5000-PRO will provide you 6,144 watts and the SL8000-PRO will provide you with 8,192tts of power. But needing a recharge, will depend of the type of devices connected to it. Our web page will provide you with a chart to guide you on the use of your system.orum.
As in the prior question, this will depend also on the system capacity you acquire.
But our systems can power almost any device you currently have on you house. It can power anywhere from light bulbs, laptops, videogame consoles, refrigerator*, charge your cell phones, electric fan, etc.
The amount of time the system lasts will depend on what you connect to it and the capacity of the system. Let’s say you have a Large Refrigerator (18-24 Cubic Feet) and decide to plug it into the system. This means you will be using 375 watts per hour, if you only connect this you will have enough energy for approximately 8 hours. Please refer to our chart on our web site.
From 2 hours to 4 hours depending on the charge input type, voltage, and amps.
Our Advanced Energy Storage Systems have small cooling fans. They run smooth, quiet and safe.
Our systems won’t generate any fumes or harmful emissions. They are so safe you can have them in your room without anything to worry about. You can have a good nights sleep, and the satisfaction of knowing you, your loved ones and your house has a reliable power back up for any emergency.
Our systems are so advanced they do not require any maintenance. If any malfunction should occur during the warranty period, please contact our service center and they will take care of it for you.
Some indeed are explosive, but ours are not. Some battery technologies such as lead-acid, lithium-ion and others may have the probability of an explosion or may catch on fire due to their chemical composition. LiFePO4 solid chemistry will resist high temperatures, punctures and even a bullet and will not explode or catch on fire. So you can rest safe wherever you use our systems.
Our “P” systems does not require any installation, you just plug it in and let it do its magic. Installing our “PRO” systems may be from just a few hours to one or two days depending on your building conditions and the system model you acquire.
All you need is a great attitude and knowing that an SL system will take care of you and your family/small business needs. You just plug it in in order to charge, and once it is completely charged, you may plug your devices into the system. THAT’S IT!!
Once you acquire the PRO system, you will have access to our certified installers. They will take care of you.
Our systems are manufactured to be used indoors manly since they are not waterproof but you can take them outdoors and use them as long as it is not raining or around a possibility of getting wet.
Only Certified Tecnicians that are trained and certified by us can install our systems in order for our warranty to protect you. But they can be installed by your trustful technician if you decide to install it at your risk.
YES, our systems are warranteed for 2 years. You can read our warranty documents
Yes, we call it “Peak Shaving”. The PRO is fully programmable to turn on and discharge during high peak times and then turn back off. It is also your backup from power loss.
Their chemistry is LiFePO4 meaning Lithium Iron Phosphate. LiFePO4 are the safest lithium batteries available on the market today. They can operate in a wide range of temperatures, from -4 to 140 F (-20 to 60 C).
Our systems have a digital panel that monintors the state of charge of the system. Added to it, some of our systems have an integrated app which helps you monitor the system anywhere you are through our app in your smartphone.
Please read carefully these documents: It’s very simple. Just unpack your new SL system. Then figure out where you want to place your new SL system. Please keep in mind that if you’re worried about you perisable items such as food, then simply plug the SL system into a 120 volt plug outlet and then plug your refrigerator into a plug of your choice on the SL system. That’s it. When the power goes out, your refrigerator will keep on running with no power interruption at all. Please refer to the operation guide for maximum loads allowed.